Light

Showing all 16 results

Aputure Amaran AL-MX Bi-Color LED Mini Light

he Aputure Amaran AL-MX Bi-Color LED Mini Light has an adjustable color temperature output from 2800 to 6500K in five steps. It features a metal chassis, an integrated lithium polymer battery, and can fit in your pocket. In addition to the stepped color temperature adjustment, the light also features stepped dimming. Included with the fixture is a magnetically-attached diffusion filter.

The integrated Li-Po battery charges via a USB Type-C port, and can be charged at 5 VDC drawing 0.5, 1, or 2 amps. The fixture has a built-in on/off switch and LED indicators that show you the charge status of the internal battery. The fixture also has a “boost mode” which increases the light’s output by 30% for 60 seconds at a time.

Credit card-sized light, easily fits in your pocket.
Integrated Li-Po battery lasts one hour on maximum, and up to four hours on minimum.
Both the intensity and the color temperature are adjustable in five steps.
A built-in “boost mode” allows you to increase the light fixture’s output for 60-second bursts.

DJI Ronin-S BG37 Grip

The DJI Ronin-S BG37 Grip is the same handgrip that comes with the Ronin-S gimbal. It features a 2400mAh built-in battery that powers the gimbal for up to 12 hours.

Kamerar BrightCast Variable 15-345 Flexible Bi-Color LED Panel with V-Mount Battery Plate

he BrightCast Variable 15-345 Flexible Bi-Color LED Panel with V-Mount Battery Plate from Kamerar is a 12 x 12″ light source that allows you to bend it into the shape that best suits your subject permitting placement in tight spaces where traditional fixtures just can’t go. The 15-345 has all the benefits offered by LED use including low power draw and cool running temperature, but it’s also dimmable and has a variable color temperature from approximately 3200 to 5600K or anywhere in between, while maintaining a high CRI of 98 in the tungsten range and 97 in the daylight range. This feature allows you to light creatively, match other fixtures, or deal with the ambient light conditions.

The rugged, shock-proof, BrightCast Variable 15-345 panel is IP67-rated water-resistant and can even withstand submersion in water up to 3.28′ deep (panel only). With an integrated 5/8″ tilting stand mount, the power supply runs on 100-240 VAC mains power via an AC adapter, making it ready for worldwide use, but you can also run on pro batteries when mains power is unavailable thanks to the U-Mount control frame. The V15-345 rolls into a cylinder to fit in the included padded, compact carrying case along with its accessories.

Flexible, Yet Rugged

Bend your LED panel to shape it to your lighting needs with the Kamerar BrightCast Variable 15-345. This thin and lightweight fixture is flexible enough to be squeezed into tight areas unlike traditional light panels. The flexible shape provides maximum portability with its ability to tightly fold into its small sling carrying case.

Maximum Durability

The 15-345 is designed to withstand the most demanding shoots. With an IP67 rating, the LED panel is water-resistant and dust-proof (the IP67 rating is for the LED panel only). The panel is protected against rain, splashing and accidental submersion in up to 3.28′ of water. The reinforced frame gives the LED panel increased durability, providing extended use.

Shape Your Light

Control the light in almost any direction imaginable. The ultra-thin LED panel can bend to increase the light spread for maximum area coverage. Curve the corners of your panel or create a cylindrical wrap to create the perfect light shape for your shoot.

256 Bi-Color LED Chips

With high CRI LEDs, colors are rendered naturally and faithfully. Make your reds, greens and blues look just the way they should.

Complete Color Control

The 15-345 offers the convenience of precise color with seamless color temperature control. Each LED chip features both daylight and tungsten LEDs so you can set it anywhere between 3200 to 5600K for creative lighting or to match other fixtures or ambient light conditions.

Power Options

Use the Kamerar BrightCast LED panel in your studio or on location. With different ways to power the light, choose the solution that best fits your situation. Mount your separately purchased battery on the control handle or connect the AC adapter for use with mains power.

Litepanels 1×1 Bicolor

Production schedules are as tight as ever and any time saved in avoiding re-lamping or swapping out filters or fixtures means money saved. The Litepanels 1X1 Bi-Color Variable Color Temperature LED Flood Light is the perfect solution to this problem. Shift from 3200K or 5600K or anywhere in between with the turn of a knob. For the first time, instead of filtering a source’s fixed color temperature, you can dial in the precise look and temperature that you want. Matching Lightpanels sources is easier too, thanks to the highly consistent nature of LEDs.

Litepanels Brick Bi-color

The Litepanels Brick One Bi-Color On-Camera Light Kit includes a Litepanels Brick on-camera light, a Seahorse case with custom cut foam, a power supply, a gel frame, and a 60° honeycomb grid. The Brick features the same rectangular form factor of the MiniPlus LED Light but offers 4x the brightness, tungsten-to-daylight variable color temperature, and an IP65 weatherproof rating; all are ideal for on-the-go shooters in varying weather conditions. Combining tightly binned, surface-mount LEDs paired with fine-tuned, custom-designed TIR optics for improved color reproduction and increased brightness, the Brick delivers a 100W tungsten-equivalent output at a 36° beam angle. This allows you to take advantage of the included gel frame or honeycomb frame without diminishing the output so far as to be useless.

Litepanels Brick One Bi-Color On-Camera Light Kit

The Litepanels Brick One Bi-Color On-Camera Light Kit includes a Litepanels Brick on-camera light, a Seahorse case with custom cut foam, a power supply, a gel frame, and a 60° honeycomb grid. The Brick features the same rectangular form factor of the MiniPlus LED Light but offers 4x the brightness, tungsten-to-daylight variable color temperature, and an IP65 weatherproof rating; all are ideal for on-the-go shooters in varying weather conditions. Combining tightly binned, surface-mount LEDs paired with fine-tuned, custom-designed TIR optics for improved color reproduction and increased brightness, the Brick delivers a 100W tungsten-equivalent output at a 36° beam angle. This allows you to take advantage of the included gel frame or honeycomb frame without diminishing the output so far as to be useless.

The Brick LED Light features a smooth 100 to 0% brightness dimmer, and it is flicker-free at any frame rate or shutter angle. A dedicated power button allows you to maintain your settings when you turn the light off. The Brick has an integrated D-Tap cable, compatible with select camera batteries and also supports AC power via the included international power supply. The Brick and accessories fit inside the custom-foamed Seahorse SE-520, which is constructed to meet Mil-Spec and IP67 standards.

Litepanels Brick Bi-Color On-Camera LED Light

Building on the popular, compact MiniPlus LED Light, the Litepanels Brick LED Light features the same rectangular form factor but offers 4x the brightness, tungsten-to-daylight variable color-temperature, and IP65 weatherproof rating, all ideal for on-the-go shooters in varying weather conditions. It is designed with tightly-binned surface-mount LEDs paired with fine-tuned, custom-designed TIR optics. This results in improved color reproduction and increased brightness that provides a longer throw. The Brick delivers a 100W tungsten equivalent output at a 36° beam angle and is flicker-free at any frame rate or shutter angle.

The Brick LED Light features an ultra-smooth 100 to 0% brightness dimmer. It also has a dedicated power button, allowing you to maintain your settings when you turn the light off. The Brick has an integrated D-Tap cable, compatible with select camera batteries, and also supports optional AC/DC power.

Key Features

  • Tungsten-to-daylight variable color-temperature
  • High-bright 100W tungsten equivalent output
  • IP65 weatherproof rating
  • Tightly-binned surface-mount LEDs paired with fine-tuned TIR optics
  • 36° beam angle
  • 100 to 0% ultra-smooth brightness dimmer
  • Flicker-free at any frame rate or shutter angle
  • Dedicated power button
  • Integrated D-Tap cable
  • Supports optional AC/DC power
  • 1/4″-20 mounting threads
  • Completely silent passive cooling
  • Half-white diffusion gel included

Litepanels Soft Diffusion Frame for Brick Bi-Color LED

The Soft Diffusion Frame for Brick Bi-Color LED from from Litepanels slides onto the front of the fixture and creates a soft wraparound quality of light. Based on the original MiniPlus, the Brick gives superior color reproduction, wider beam spread and higher intensity thanks to custom paired optics.

Lowel Caselite 2

Lowel Caselites are designed to offer beautiful, soft, easy-to-use fluorescents in a compact, location-friendly system. The current popularity of fluorescent lights in film & video production is well deserved. They offer cool, soft, and efficient light at several times the output of incandescent halogen sources.

Caselites are compact, lightweight, rugged, and completely self-contained without sacrificing output or light quality. The all-in-one Caselite is both light and case combined.

Orbis ring light diffuser

The Orbis Ring Flash is designed to affix onto the front of a common shoe-mount flash and is suspended around the circumference of a lens.
The Orbis does not produce light independently, rather it is a light modification device that produces an effect similar to studio ring flashes usually costing ten times the price of the Orbis.

Tristar 2

he Tristar 2 High-Brightness Daylight SMD LED Light features 63 daylight balanced SMD LEDs and is suitable for use on camcorders, video capable DSLRs, or ENG-style cameras. A built-in dimmer allows you to adjust the brightness level of the light, which draws only 6 watts at maximum brightness. This light can be powered by four AA batteries (not included), as well as by a D-Tap using the included D-Tap cable.

The detachable 2-leaf metal barn doors help you control spill and shape the light’s output. A diffusion filter and daylight to tungsten (CTO) filter are also attached to the barn doors. These two filters can be used individually to soften or change the color temperature of the light’s output. An included cold shoe to ball joint mount enables attaching the fixture to your camera’s cold shoe mount.

63 long-life SMD LEDs
Slim, sturdy, lightweight, and compact
Integrated dimming control and power off
Easily mounts on cameras, stands, or handheld

Zylight 1

The Zylight gives you the same punch and light quality of a 400W HMI while consuming half the power, and in a package as small as some 400W HMI’s ballasts. No more worrying about hot lights, expensive bulb burnouts, flicker, voltages, bulky DC converters, hot restrikes, rain, or snow. And it costs half as much as many HMI packages.

Zylight IS3 | intelligent Studio LED light

This is the black Zylight IS3 LED Light. The IS3 panel combines a host of features in an LED panel that were unavailable in a single light source. The high output unit is multi-voltage AC or 24-48 VDC powered. The panel offers up to 100% dimming without color shift and color temperature control from 2,500 to a remarkable 10,000K. Additionally, +/- Green CC control makes very precise fine-tuning easy. All of these features can be controlled with 5-pin standard DMX cable while multiple panels ganged together behave as one unit via built in ZyLink technology. The package includes a universal voltage AC power supply, Kino-style mounting plate and a 90° arm with a 5/8″ (16mm) receiver.

Zylight Z90

The Zylight Z90 LED Light Head packs 230 Hi-leds (high-density light emitting diode) into 1 square inch panel which produces a remarkably soft 60° beam with 1-100% dimming.

But that’s just the beginning. The Z90 offers almost unheard of control of light quality via 3 output modes. White Mode allows selection of 3200K or 5600K white light, while Color Mode enables the user to tweak the red/green/blue hue and adjust the saturation of it. In Gel Mode the Z90 outputs white light with color temperature control from 2500K-9000K as well as +/- green color correction control.

Loading

Filter

Your Cart